Trading House Penztyazhpromarmatura, LLC
Operation as oil and gas industry supplier
Operation as oil and gas industry supplier
1. 1. Date of commencement of operation as a supplier of the oil and gas industry
1956
2. 2. Main types of products (services) for the oil and gas industry
| Type of product (service) |
Sales volume, rubles |
| 2005 |
2006 |
2007 |
2008 (forecast) |
| Wedge gate valves |
850 000 000 | 1 500 000 000 | 1 750 000 000 | |
| Ball valves |
86 000 000 | 275 000 000 | 500 000 000 | |
3. 3. The most competitive products (services) and benefits they offer
Steel wedge gate valves with rising stem DN400-1200mm PN 1,6-8,0 MPa, TU26-07-1125-96
Design features
• Carbon steel or alloy steel cast valve body.
• Full-opening valve.
• Corrosion-resistant facing on body rings.
• Plug on the valve cap.
• Rolling bearings.
• Stuffing box rings are made of thermal-expanded graphite.
Technological advantages
• Chemical and temperature resistance.
• Low hydraulic resistance coefficient.
• Pipeline cleaning and diagnostics can be performed without removal of valves.
• Improved reliability and longer service life.
• Pressure safety.
• Additional sealing of valve gate (pressure feed).
• Ñíèæàþòñÿ óñèëèÿ íà ïðèâîäíîì óñòðîéñòâå.
• Easy operation of valves.
• Reduced frictional wear of stem.
• Time between repairs increases n-fold.
Ball valves DN50-1200 PN 1,6-16,0 MPa, TU3742-005-05749375-99
Design features
• Full opening valve.
• Spring-assisted double-seal seats (primary - «metal-metal», secondary – «metal-polyurethane»).
• Non-rigid fixing of secondary soft seal.
• Forced lubrication of stem and seat seals.
• Cap turn stop.
• Brackets and removable metal enclosure on extension column.
• Indicator (pointer).
• Hand-operated spare.
• Split stem packing.
• Pressure relief hole in the cap.
• Standard fittings for sealing grease.
• Taper plugs for water bleed-off and safe decompression.
• Filter (on pneumodrive and pneumohydrodrive) for moisture drain.
Technological advantages
• Low hydraulic resistance coefficient
• Pipeline cleaning and diagnostics can be performed without removal of valves.
• Seats are in constant contact with the gate that is protected from operating fluid caking and has sustained integrity both on inlet and outlet (double acting seats).
• High wear resistance.
• Integrity can be restored (if required) in operation.
• Precise alignment of the plug relative to pipeline axis in “on” and “off” positions.
• Piping system protection.
• Gate position is easily pinpointed.
• Good visibility from high altitude.
• Possibility (in no-current state) for opening and closing of the valve.
• Possibility to safely replace the soft stem seal on the active gas pipeline.
• Reduced force on control device.
• Quick connection of stuffing box sub.
• Air bleeding from the valve.
• Quick replacement of adsorbent cartridge in operation
At the customer’s request, main parts of the valves can be manufactured of carbon corrosion-resistant steel or titanium alloy.
Both single-piece and knock-down valve bodies are offered.
Parallel-slide gate valve DN 500-1200 PN 8,0-12,5 MPa, ÒÓ3741-007-05749375-2005
Design features
• Full-opening body.
• Double seal (primary - «metal-metal», secondary – «metal-elastomer») on o-rings of the body.
• Corrosion-resistant gate that is in constant contact with o-rings of the body.
• Drain line inside the valve.
• Removable polyurethane o-rings and clamp connection “body-cap”.
• Stuffing box rings are made of thermal-expanded graphite.
Technological advantages
• Low hydraulic resistance coefficient.
• Pipeline cleaning and diagnostics can be performed without removal of valves.
• Improved reliability and longer service life.
• O-rings and valve interior are protected against abrasive wear, settlings and caking of operating fluid.
• Settlings can be removed from the valve body.
• High degree of maintainability.
• Reduced frictional wear of the stem.
• Long service life of the stuffing box.
The valve design has additional advantages:
- Protection of drain pipeline from damage and freezing in winter time;
- Simple design of seats, easy repair;
- Removable o-rings are replaceable;
- Quick-removal clamp connection that allows to reduce time for valve assembly;
- Threaded end of drain pipe bypass that allows to connect dewaxing unit and outlet hose. The hole for the drain plug can serve to measure leaks.
- The valve can be repaired without removal from the pipeline.
4. Permits for use of the products. Certificate number, date of issue and certificate issuing authority
Certificates of compliance are issued by Federal Service for Environmental, Technological and Atomic Supervision.
Cast wedge gave valves DN400-1200 Certificate ¹ÐÎÑÑ RU.ÍÎ01.Â00620 valid from 11.09.06 to 10.09.09. Permit ¹ÐÐÑ 00-22486 valid till 09.10.09.valid from 23.12.05 to 22.12.08. Permit ¹ÐÐÑ 00-19724 valid till 20.02.09.
5. Major oil and gas industry contracts received over the past five years. Equipment supplied under the contracts and customer names
2005: JSC “Severstal” – cast wedge gate valves
2005-2007: JSC “Surgutneftegaz” - cast wedge gate valves
2006: LLC “Balttransservis”, JSC “NK”Rosneft-Tuapsenefteprodukt”cast wedge gate valves
2006: JSC “Kazstroyservis” - ball valves
2006-2007: JSC “TNK-BP Holding”, LLC “Rosneft-Yuganskneftegaz” - cast wedge gate valves
2007: JSC “Gazpromneft” (LLC “Sibneft-Khantos”, JSC “Sibneft-NNG”) - cast wedge gate valves
2007: JSC “Novoshakhtinsky Plant of Petroleum Products” - cast wedge gate valves, parallel-slide gate valves with Frusis corrosion-resistant coating (connection to “Chernomortransneft” system)
6. Experience of supplying products (services) to foreign customers over the last five years. Types of products (services), export markets and local projects where the company participated
2000-2003: manufacturing and delivery of pipeline valves for Jiansun nuclear power station (China);
2004: manufacturing and delivery of pipeline valves for Korean Zink Group (North Korea);
2005: manufacturing and delivery of pipeline valves for “Busher” nuclear power station (India)
2006-2007: manufacturing and delivery of pipeline valves for “Kundakulam” nuclear power station (India)
7. Customer feedback process and after-sales service
Questionnaire surveys are conducted on a regular basis to estimate customers’ needs. Warranty maintenance is provided according to product passport. Aftersale maintenance is performed at the customer’s request.
8. Major competitors and their products (services)
JSC “Tyazhpromarmatura”, Aleksin (ball valves, parallel-slide valves)
JSC “Ikar”, Kurgan (wedge gate valves)
JSC “BAZ”, Blagoveschensk (wedge gate valves)
9. Main suppliers of equipment and materials
CJSC “Tulaelektropribor”- electric drives;
CJSC “Konar” – flanges;
JSC “Neftekhimzapchast” - flange fittings.
|
Print